DIY Remote MP3 Bluetooth Speaker


Click here for the video 

Pakistan Science Club E-Learning Online Store


Creating a DIY USB MP3 player with a Bluetooth module, FM radio, USB, SD card, and Aux input involves combining different modules and components. Here's a basic guide to help you build a simple version of such a player:

Components Needed:

  1. MP3 Player Module with USB/SD Card Support:

    • Look for a module that supports USB and SD card playback.

  2. Bluetooth Module:

    • Get a Bluetooth module compatible with your MP3 player module.

  3. FM Radio Module:

    • Choose an FM radio module with audio output.

  4. Amplifier Module:

    • An amplifier module to boost the audio signal.

  5. Speaker:

    • A speaker suitable for your amplifier module.

  6. Auxiliary Input Jack:

    • A 3.5mm stereo jack for the Aux input.

  7. Power Supply:

    • A power supply or battery to power the entire system.

  8. Switches, Wires, and Connectors:

    • Various switches for controlling different functions and wires to connect the modules.

  9. Enclosure:

    • A suitable enclosure to house all components securely.

Circuit Design:

  1. MP3 Player Module:

    • Connect the USB and SD card slots of the MP3 player module to their respective modules.

  2. Bluetooth Module:

    • Connect the audio output of the Bluetooth module to an available input on the MP3 player module.

  3. FM Radio Module:

    • Connect the audio output of the FM radio module to another available input on the MP3 player module.

  4. Amplifier Module:

    • Connect the audio output of the MP3 player module to the input of the amplifier module.

  5. Speaker:

    • Connect the speaker to the output of the amplifier module.

  6. Auxiliary Input Jack:

    • Connect the auxiliary input jack to an available input on the MP3 player module.

  7. Power Supply:

    • Connect the power supply to all the modules and the amplifier.

  8. Switches:

    • Use switches to control the power, Bluetooth, FM radio, and other functions.

Assembly Steps:

  1. Mount the modules securely inside the enclosure, leaving openings for USB/SD card slots, Bluetooth pairing buttons, and switches.

  2. Connect the modules and components according to the circuit design.

  3. Mount the speaker in a suitable location on the enclosure.

  4. Install switches and knobs for easy control.

  5. Ensure proper wire management to avoid interference and short circuits.

  6. Close the enclosure securely.

Usage:

  1. Power on the device and select the desired source (USB, SD card, Bluetooth, FM, Aux).

  2. Use the controls and switches to adjust volume, change tracks, and select functions.

  3. Connect your smartphone or other Bluetooth-enabled devices for wireless audio playback.

Important Notes:

  • Power Supply:

    • Make sure the power supply is suitable for all modules and provides the required voltage and current.

  • Safety:

    • Exercise caution when working with electronic components and power sources.

  • Compatibility:

    • Ensure that all modules and components are compatible with each other.

  • Enclosure Ventilation:


    • Provide proper ventilation for heat dissipation, especially for amplifier modules.
  • This is a basic guide, and the specifics may vary based on the modules and components you choose. Always refer to the datasheets of individual modules for detailed specifications and connections.