Building Your First Arduino Project: A Beginner’s Guide
Electronics Projects : Introduction Arduino is a versatile and beginner-friendly platform for creating electronic projects. This guide will walk you through building your first Arduino project – a simple LED blinking circuit. Materials Needed Arduino Uno board USB cable LED Resistor (220 ohms) Breadboard Jumper wires Step-by-Step Guide Install Arduino IDE: Download and install the Arduino IDE on your computer. Connect Arduino: Use the USB cable to connect your Arduino Uno to your computer. Set Up the Circuit: Place the LED and resistor on the breadboard and connect them to the Arduino pins. Write the Code: Open the Arduino IDE and write the code to blink the LED. The basic code is: cpp Copy code void setup () { pinMode ( 13 , OUTPUT); } void loop () { digitalWrite ( 13 , HIGH); delay ( 1000 ); digitalWrite ( 13 , LOW); delay ( 1000 ); } Upload and Test: Upload the code to the Arduino and observe the LED blinking. Tips and Tricks Double-check your circuit connect