DIY Multiport USB HUB






Building a DIY multi-port USB hub involves assembling several components to create a hub that can accommodate multiple USB devices. Here's a basic guide to help you get started.

Click the Picture for Daraz Link

Materials Needed:

  1. USB Hub Controller Board:

    • Purchase a USB hub controller board. These can be found online and come in various port configurations.
  2. USB Ports:

    • Get USB ports that match the number you want on your hub. You can salvage these from old electronics or purchase them online.
  3. USB Cable:

    • A USB cable with a connector type that matches your hub controller board.
  4. Power Supply:

    • Depending on the power requirements of your USB hub, you may need an external power supply.
  5. Enclosure:

    • Choose a suitable enclosure to house the hub and provide protection. This could be a plastic or metal box.
  6. Drill and Bits:

    • If the enclosure doesn't have holes for USB ports, you'll need a drill and appropriate drill bits.
  7. Soldering Iron and Solder:

    • For soldering connections between the USB hub controller board, USB ports, and the USB cable.
  8. Wires and Wire Strippers:

    • Use wires to connect components and wire strippers to prepare the wires for soldering.



Instructions:

  1. Prepare the Enclosure:

    • If your enclosure doesn't have holes for USB ports, use a drill to create openings for each port. Arrange them in a way that is convenient for connecting devices.
  2. Install USB Ports:

    • Mount the USB ports in the holes you drilled. Secure them in place using adhesive or by fixing them into the enclosure.
  3. Connect USB Hub Controller Board:

    • Connect the USB hub controller board to the USB ports using wires. Solder the connections carefully.



  1. Connect USB Cable:

    • Connect the USB cable to the USB hub controller board. This cable will serve as the link between the hub and the computer or power source.
  2. Add External Power Supply (if needed):

    • If your USB hub controller board requires external power, connect the power supply to the appropriate input on the board.
  3. Secure Components Inside Enclosure:

    • Place the USB hub controller board, USB cable, and any other components inside the enclosure. Make sure everything is secured and won't move around.


  1. Close and Seal the Enclosure:

    • Seal the enclosure to protect the components and ensure a neat appearance.
  2. Test the USB Hub:

    • Connect the DIY USB hub to a computer or power source and test its functionality. Ensure that each port works and that the hub is recognized by the connected device.

  1. Use and Enjoy:

    • Once you've confirmed that the DIY multi-port USB hub is working correctly, you can use it to connect multiple USB devices to a single port.



Remember to exercise caution when soldering, and if you're unfamiliar with electronics, consider seeking guidance from someone with experience. Additionally, always follow safety guidelines to avoid electrical hazards.


 

Comments

Popular Posts

F450 Drone Kit DIY Quadcopter Flying Multicopter Heli Flame Wheel Kit in Pakistan

Heat Gun – For loosening glue/seals

Mini Wind Turbine with PVC Pipes

PVC Pipe Mini Washing Machine

DIY Mini iPhone 17 Pro Max with Paper and Cardboard

Touch Sensor

DIY electric fireplace decor

PVC Pipe Mini Lathe Machine

Gas Leakage Sensor