DIY Automatic Tea & Coffee Dispenser


 

Creating a DIY Automatic Tea and coffee Dispenser can be a fascinating and practical project. Below is a step-by-step guide to help you get started:

Pakistan Science Club E-Learning Online Store



Materials Needed:

  • Electric water boiler or kettle
  • Tea and coffee containers with dispensing nozzles
  • Electric pump
  • Tubing (food-grade)
  • Microcontroller (Arduino or Raspberry Pi)
  • Sensors (optional, for automation)
  • Power supply
  • Switches and buttons (for manual control, if desired)
  • Cups or mugs
  • Enclosure or casing
  • Various tools (screwdriver, soldering iron, etc.)
  • Silicone adhesive or hot glue


Steps:

  1. Prepare the Containers:

    • Choose containers for tea and coffee and attach dispensing nozzles securely. Ensure they are food-grade and suitable for liquids.

  2. Install Electric Pump:

    • Connect the electric pump to the tubing. Attach one end to the pump outlet and the other end to the dispensing nozzle.

  3. Set Up the Water Boiler:

    • If using a separate electric water boiler, set it up according to the manufacturer's instructions. Make sure it has a continuous flow option.

  4. Connect Pump to Water Boiler:

    • Connect the pump's inlet to the water boiler's outlet. This will allow hot water to be pumped to the dispensers.

  5. Implement Automation (Optional):

    • If you want to automate the dispensing process, integrate sensors (e.g., infrared sensors) to detect cups and control the pump accordingly. Connect these sensors to the microcontroller.

  6. Connect Microcontroller:

    • Connect the microcontroller (Arduino or Raspberry Pi) to the electric pump and sensors. Program the microcontroller to control the pump based on user input or sensor data.

  7. Add Manual Controls (Optional):

    • Install switches or buttons for manual control. This allows users to initiate the dispensing process manually.

  8. Create Enclosure:

    • Place all components, including the water boiler, pump, containers, and microcontroller, inside a suitable enclosure or casing. Ensure proper ventilation to dissipate heat.

  9. Secure Tubing:

    • Secure the tubing neatly inside the enclosure using adhesive or clips. Ensure there are no kinks or obstructions that might hinder the flow of liquids.

  10. Test the Dispenser:

  • Test the automatic and manual dispensing functionalities. Adjust the program or controls as needed.


  1. Final Adjustments:
  • Fine-tune the system based on your preferences. Check for any leaks, ensure proper heating, and verify that the dispensing nozzles work efficiently.
  1. Enjoy Your DIY Automatic Tea & Coffee Dispenser:
  • Place cups or mugs under the dispensers, activate the dispenser, and enjoy a cup of tea or coffee with minimal effort!