How to Make a Tower Lamp Using Cardboard with DIY Club Logo

Introduction

A tower lamp made from cardboard is an affordable, eco-friendly, and creative DIY project. By adding your DIY Club brand logo, you can personalize it for home décor, gifting, or showcasing your DIY brand. This project is simple, safe, and perfect for beginners.

Required Materials

• Thick cardboard sheets

• LED bulb or LED strip (low heat)

• Lamp holder

• Electric wire and plug

• Switch (optional)

• Cutter or scissors

• Glue gun or strong adhesive

• Ruler and pencil

• Printed DIY Club logo or paint/marker to draw it

• Decorative paper or paint (optional)

Step-by-Step Process

Step 1: Design the Tower

Draw a tall rectangular or cylindrical tower on the cardboard. Cut equal panels for all sides. Decide where your DIY Club logo will be displayed.

Step 2: Cut Light Patterns

Cut simple shapes or patterns on the panels to allow light to shine through. You can also cut out the DIY Club logo so the light comes through it.

Step 3: Assemble the Tower

Glue the cardboard panels together to form a stable tower. Make sure the base is strong to prevent tipping.

Step 4: Add the Logo

Attach the printed DIY Club logo or paint/draw it on the lamp surface. Position it so that it is clearly visible when the lamp is lit.

Step 5: Install the Lighting

Place the LED bulb or LED strip inside the tower. Always use LED lights to prevent heat damage to the cardboard.

Step 6: Wiring

Connect the lamp holder to the plug and switch (if used). Keep wires insulated and secure inside the tower.

Step 7: Test the Lamp

Insert the LED bulb, switch it on, and check the light. Make sure your DIY Club logo is visible and the light spreads evenly.

Benefits of a Cardboard Tower Lamp with Logo

• Low-cost DIY project

• Lightweight and eco-friendly

• Easy to customize with your logo or design

• Perfect for home décor, gifting, or showcasing your DIY brand

• Safe and beginner-friendly

Common Mistakes to Avoid

• Using high-heat bulbs that can burn cardboard

• Weak cardboard structure

• Poor glue bonding

• Exposed wiring

• Placing the logo where the light doesn’t shine

Conclusion

Creating a tower lamp from cardboard with your DIY Club logo is a fun and creative DIY project. It’s safe, stylish, and perfect for personal or brand use. With a little care and creativity, you can make a unique lamp that highlights your brand and lights up your space.

---