Powerful Torch Light Made at Home | How to Make a Torch Light With PVC Pipe | Rechargeable Torch

 

Powerful Torch Light Made at Home | How to Make a Torch Light With PVC Pipe | Rechargeable Torch

Introduction

A powerful rechargeable torch light is useful during load shedding, travel, and emergencies. In this DIY project, we’ll learn how to make a high-brightness torch light at home using a PVC pipe and simple electronic components.

Project Overview

This torch uses a high-power LED powered by a rechargeable battery. A PVC pipe is used as the body, making the torch lightweight, strong, and low-cost.

Components Required

• High Power LED (3W / 5W)

• PVC Pipe (torch body)

• Rechargeable Battery (18650 Li-ion)

• Charging Module (TP4056)

• LED Driver Module

• On/Off Switch

• Heat Sink

• Lens or Reflector

• Wires

Circuit Explanation

• Battery connects to the charging module

• Charging module supplies power to LED driver

• LED driver powers the high-power LED

• Switch controls the torch ON/OFF

Step-by-Step Working

1. Cut PVC pipe to required length

2. Fix LED on heat sink and place at front

3. Install battery and charging module inside pipe

4. Connect switch and wiring

5. Close the pipe and test the torch

Features

• High brightness

• Rechargeable battery

• Strong PVC body

• Low cost

• Easy to repair

Applications

• Home backup light

• Outdoor camping

• Emergency use

• Travel and hiking

Safety Tips

• Use proper heat sink for LED

• Do not overcharge battery

• Insulate all connections

Conclusion

This DIY rechargeable torch light is a practical and powerful project that can be made at home with basic tools. It’s perfect for beginners and can be upgraded for higher brightness.

---