Manual Ice Crusher Machine Gola Maker For Home Easy To Use For Ladies

Click the Picture for Daraz Link

Pakistan Science Club E-Learning Online Store

You need this code to enter the Class usdcxz3 

 Creating a DIY gola (shaved ice) making machine can be a fun project, especially during hot weather. Below is a simple guide for building a basic hand-cranked gola maker using easily available materials. Please note that safety is important, and you should take appropriate precautions when building and using this device.

Materials Needed:

1. Electric Drill:

   • A cordless electric drill can be used to power the gola machine.

2. Plastic or Metal Container:

   • To hold and rotate the ice.

3. Ice Shaver Blade:

   • You can purchase a manual ice shaver blade online or repurpose an existing one.

4. Base:

   • A stable base to attach the container and drill securely.

5. Crank Mechanism:

   • A handle or crank mechanism to attach to the drill.

6. Bolts, Nuts, and Washers:

   • To secure and assemble the components.

7. Wood or PVC for Frame:

   • To create a frame for holding the drill and ice container.

8. Safety Gear:

   • Safety glasses, gloves, and other protective gear.

Instructions:

1. Prepare the Container:

   • Attach the ice shaver blade to the bottom of the container. Make sure it is securely fastened.

2. Build the Frame:

   • Construct a frame using wood or PVC to hold the drill and the ice container securely. The frame should be stable and allow for easy rotation of the container.

3. Attach the Drill:

   • Secure the electric drill to the frame. Ensure that the drill is positioned in a way that allows it to rotate the ice container smoothly.

4. Create the Crank Mechanism:

   • If the drill doesn't have a built-in handle, you may need to create a manual crank. This can be a simple handle attached to the drill chuck.

5. Secure the Container:

   • Attach the ice container to the frame so that it can rotate freely when the drill is in operation.

6. Test and Adjust:

   • Test the gola maker with a small amount of ice. Adjust the position of the container, the tightness of the blade, and other factors as needed.

7. Safety Precautions:

   • Wear safety glasses and gloves when operating the gola maker. Ensure that the blade is securely fastened and that all components are stable.

8. Enjoy Making Gola:

• Once you've tested and adjusted the gola maker, you can start making shaved ice treats by feeding ice into the rotating container while turning the crank or powering the drill.
• 
  
  
  
  
  
  
  
  
  
  
• 
  
9. Remember to exercise caution when using power tools, and if you're not comfortable with certain aspects of this project, consider seeking help from someone experienced in DIY projects or engineering.